F3 Micro 10DOF + 600TVL AIO FPV Cam w/VTX + PDB Flight Controller Combo

Old Price: $104.95

Special Price: $54.95


Ships from :



Available: 0 Shipping Info*


Available: 1 Shipping Info*


Available: 0 Shipping Info*

This is Hyperion Flight Controller + FPV Camera with VTX + PDB combo which includes F3 Micro 10DOF Flight Controller w/ USB TTL, Hyperion Mini 600TVL Camera with Built-in 5.8Ghz 25Mw VTX and Micro Power Distribution Board w/BEC 5V &12V

This combo is ideal for Micro Quad FPV frames.

Included with the package

Please refer each product page to see details.

Flight Controller Specifications:

  • 32bit STM32F303 72Mhz Cortex M4 core CPU
  • High-Capacity Flash
  • MPU6050 accelerometergyro
  • MS5611 Barometer
  • HMC5883 compasses
  • Size: 27mm x 21mm x 5mm
  • 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
  • 8x 3pin for ESCServo connections
  • 2x 4pin JST-SH sockets for 2x serial ports
  • 1x 4pin JST-SH sockets for battery voltage and buzzer
  • 1x 4pin JST-SH socket for I2C

PDB Specifications:

  • Input Voltage: 7~21VDC (3S~5S LiPoly)
  • ESC outputs continuous current: 20A per output
  • ESC outputs peak current (10secs/min): 25A per output
  • BEC 5V output: Designed for RC Receivers, Flight controllers, OSD and Servos.
  • BEC 5V output: DC/DC synchronous buck regulator, efficiency is up to 95%
  • BEC 5V output voltage: 5.0 +/- 0.1VDC
  • BEC 5V output continuous current: 2A
  • BEC 12V output: The battery should be 4S~5S LiPoly
  • BEC 12V output: Standard output designed to power cameras and video transmitters, etc
  • BEC 12V output voltage: 12.0 +/- 0.2VDC
  • BEC 12V output continuous current: 2A (max 2.5A 5sec/min)
  • Dimensions: 32 x 22 x 3mm
  • Weight: 3.5g

Mini Cam & VTX Specifications:

  • Transmitter power: 25mW (50~100m range approx)
  • Input Power: 2.5 - 5V
  • Camera Resolution: 600TVL
  • Minimum Illumination: 1 lux
  • Field of view: 120° viewing angle
  • Antenna Dimensions: 20mm x 25mm diameter
  • Antenna: Cloverleaf Antenna (RHCP)
  • Video Output: NTSC
  • Frequency: 5.8Ghz, 5 bands, 40 channel, 5658-5917
  • Size: 20mm x 17mm (LxW)
  • Weight: 4.5grams


  • Band 1(F): 5740(CH1), 5760(CH2), 5780(CH3), 5800(CH4), 5820(CH5), 5840(CH6), 5860(CH7), 5880(CH8)
  • Band 2(E): 5705(CH1), 5685(CH2), 5665(CH3), 5645(CH4), 5885(CH5), 5905(CH6), 5925(CH7), 5945(CH8)
  • Band 3(A): 5865(CH1), 5845(CH2), 5825(CH3), 5805(CH4), 5785(CH5), 5765(CH6), 5745(CH7), 5725(CH8)
  • Band 4(R): 5658(CH1), 5695(CH2), 5732(CH3), 5769(CH4), 5806(CH5), 5843(CH6), 5880(CH7), 5917(CH8)
  • Band 5(B): 5733(CH1), 5752(CH2), 5771(CH3), 5790(CH4), 5809(CH5), 5828(CH6), 5847(CH7), 5866(CH8)

Notice: You must use a stable power source for best picture quality and range. If you are connecting your power wires to a BEC, Receiver, or the PCB on your multicopter then you must use a AV Power Filter. If you are connecting directly to a 1S LiPo then you do not need a AV Power Filter.