FMS Edge 540 3D 1320mm PNP

Old Price: $199.95

Special Price: $159.95

Part Number: FMS-EDGE540PNP

Ships from :

Hong Kong


Available: 0


Available: 0


Available: 0 Shipping Info*


Available: 0

The Zivko Edge 540 manufactured by Zivko Aeronautics  is a highly aerobatic aircraft. Capable of a 420 degree per second roll rate and a 3,700 foot per minute climb rate, it has been flown to victory on the international Unlimited aerobatics circuit several times since the mid-1990s. A tandem-seat version is sold as the Edge 540T. The Zivko Edge 540 is the most common aircraft used in the Red Bull Air Race World Series – in fact all champions of the World Series have flown this aircraft.

The new Edge 540 is the best plane FMS has engineered to date in its line of aerobatic models. The performance this plane delivers on 4s LiPo power is just amazing! A scale model that has the performance envelope of this kit is nearly unheard of in this size plane. It is happy wide open eating up the sky or in high alpha flight hanging on the propeller. At high speed, tracking is predictable and literally flies like it is on rails, just point it where you want it to go and she goes with no complaint. There are no bad characteristics even with very hard control inputs during tight banks. The new composite wing structure is very ridged and it shows in high G turns and dive pull outs. Simple pull back on the throttle and the 540 treats you with tons of lift with NO tip stalls or washout propagation as experienced in other planes in this size.  Doing hovering, waterfalls, and harriers are delightfully fun.

The new 17g digital servos work flawlessly, providing precise control even under very high load. Their ability to center precisely even after hard high load maneuvers is right on par with servos at a much higher price point. The new “Gold” 760Kv motor and 60A ESC combination performed flawlessly.

FMS has kept the build of this plane very straight forward. All surfaces and screws aligned with their threaded surfaces. Plastic joints work perfect and the carbon wing spar fits perfectly into its sleeve. The wing mounts overlap and the rudder uses 3 nylon hinges which makes for an extra strong design. All 17g metal gear digital servos are the highest quality servos we have seen on any PNP plane to date. Mounted in pockets which have a screw on cover allows for easy servo horn changes and or adjustments. There is easy access to the ESC and the design of the 540 allows for more than adequate cooling. All the servo connectors are clearly labeled making installation of your radio system a snap. Quality along with its fit and finish makes for one great flying machine. Order yours today.


  • Durable EPO foam construction
  • New designed spinner & 3 blade propeller
  • Scale pilot figure
  • Powerful 60A ESC with 3A BEC and 3948-760Kv Motor
  • 4 X 17g digital metal gear servos
  • Large control surfaces for advanced 3D and aerobatic flight
  • Carbon wing and elevator reinforcement
  • Pinned rudder hinges

Included with the package:

  • FMS Edge 540 3D 1320mm PNP x 1


  • Wingspan: 1320mm/52in
  • Overall Length: 1270mm/50in
  • Motor Size: 3948-KV760
  • ESC: 60A with 3A BEC
  • Servo: 17g digital metal gear Servo x 4
  • Radio: 4 Channel (not included)
  • CG (center of gravity): 80mm (From Leading Edge)
  • Prop Size: 13*5 3Blade Propeller With Spinner
  • Recommended Battery: Li-Po 14.8V 2,600mAh 25C (not included)
  • Flying Weight: Around 1680g/3.7lb

Note: This is a PNP kit and requires Radio 4/6CH System, Battery and Charger. This is not a beginners model and requires expert level knowledge to operate and fly. We recommend flying in open areas free of obstacles.

Parts & Accessories