You have no items in your shopping cart.
Hyperion QAV 210 Quadcopter Kit V2
Part Number: HP-FPQAV210V2
The new Hyperion QAV210 V2 Carbon Fiber FPV Quadcopter airframe is the all new ready go to frame for acrobatic FPV sessions. The QAV210's design comfortably supports 5” props and 220x motors, in spite of its small size airframe. The kit contains High quality 3K Carbon Fiber Plates and all hardware weighs in at only 91g. The included, but optional landing gear adds another 5g. The included 35mm Aluminum spacers provide ample height and room for electronic installation and easy access.
The QAV210 V2 is precision machined for a superb fit-and-finish and is an awesome FPV racer and acrobat. The frame is designed to mount a mini 26mm FPV camera, at a range of angles and also includes a mounting plate to accept standard 32mm board cameras at a fixed 20 degree angle. The kit includes a PDB and supports stack mounting method. The assembled airframe supports both 3s or 4s LiPo from 1000mah to 1300mah.
- Precision machined from 3K Carbon Fiber, airframe features a solid one piece 3mm thick bottom main plate
- Motor mounting holes designed to fit a variety of motors (M3 and M2 screw mounting patterns)
- Bumpers on the end of the arms to protect the motor during a crash
- Cover plate includes cutouts for SMA connector ,video transmitter and a holder for XT-60 LiPo pig-tail
- Simple Hook & Loop strap method for LiPo (recommended LiPo is a 1300mah 3 or 4s)
- Support for 26mm to 32mm board cams
- Option to fit HD cameras like the GoPro 4, Mobius or GoPro Session with optional camera vibration mount(not included)
- Included PDB with 30.5 x 30.5 mounting holes, support standard stack mounting
- 35mm spacers provide enough room for all electronics
Included with the package:
- Hyperion QAV 210 Quadcopter Kit V2 x 1
- PDB x 1
- Material: 3K Carbon fiber sheet
- Frame: 210mm
- Airframe Weight: 91g (96g with included Landing Gear)
- AUW Weight: 256-281g (Depending on motor choice and all flight electronics and FPV gear, but without Lipo or HD camera
- Input Voltage: 9~26VDC (2S~6S LiPo)
- BEC output voltage: 5.0 +/- 0.1VDC
- BEC output voltage: 12.0 +/- 0.2VDC
- Dimensions: 36 x 36mm
- Mounting holes: 30.5x30.5mm
- Weight: 6.5g
Note: This is a Kit and needs to be assembled, electronics not included and is a separate purchase.
Recommended motor: https://hyperion-world.com/en/p2662165-hp-mr2204-2100set-12971