Scorpion 4035XL Outrunner motor 100Amp (560Kv)

Old Price: $209.99

Special Price: $53.95

Part Number: SC-HK4035XL-560

Ships from :

Hong Kong

OUT OF STOCK

Available: 0
USA

IN STOCK

Available: 10+
Japan

OUT OF STOCK

Available: 0 Shipping Info*
China

OUT OF STOCK

Available: 0

Scorpion HKIII-4035 Series Motor* is designed for using on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter.

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180℃ (356 ℉). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

Included with the package:

  • Scorpion 4035XL Outrunner motor 100Amp (530Kv) x 1

Specifications:

  • Type: 4035-530
  • Motor Kv: 530KV RPM/Volt
  • Stator Diameter: 40 mm (1.57")
  • Stator Thickness: 35 mm (1.024")
  • No. of Stator Arms: 12
  • Magnet Poles: 10
  • Motor Wind: 9 Turn Delta
  • Motor Wire: 22 - Strand 0.29mm
  • No-Load Current (IO): 2.15 Amps @ 10v
  • Motor Resistance (RM): 0.015 Ω
  • Max Continuous Current: 80 Amps
  • Max Continuous Power: 3400 Watts
  • Outside Diameter: 49.98 mm (1.97")
  • Shaft Diameter: 5.98 mm (0.235")
  • Body Length: 61.8 mm (2.43")
  • Overall Shaft Length: 100.0 mm (3.93")
  • Max Lipo Cell: 12S
  • Peak Current: 100A (5 seconds)
  • Peak Power: 4400 Watts (5 seconds)
  • Motor Timing: 5deg
  • Drive Frequency: 8kHz
  • Weight 460 g (16.22 oz.)

Note: *This motor is using 30mm*25mm bolt spacing on the mounting with M4 Screw holes

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.