Z2205 Outrunner motor (1370Kv)

Old Price: $17.20

Special Price: $5.00

Part Number: HP-Z2205-38

Ships from :

USA

IN STOCK

Available: 2 Shipping Info*
Japan

BACKORDER

Available: 0 Shipping Info*
China

BACKORDER

Available: 0 Shipping Info*

The Z22 Series Hyperion Outrunners are some of the best-built motors we have ever seen. From front to back, only the highest quality materials and components are used. The arrangement of twelve stator poles and fourteen magnet poles is primarily responsible for the high torque the Z Series generates on direct drive. The stators are hand-wound in an optimal pattern for copper packing, so we get less resistance for a given number of turns. The stator plates are finished with a lifetime anti-oxidant coating, to eliminate losses which can occur due to magnetic shorting from corrosion.

The magnets are especially made for the Z Series motors, and are rounded on both bell and stator sides. The result it that contact area with the bell is complete. The full contact with the bell on one side, and matching curvature to the stator on the other, means that the magnetic flux lines are complete and optimally shaped; this means higher efficiency, lower incidence of motor stalling, and smoother starts. The magnets themselves are produced in one of the foremost factories in the world, and are the latest type, featuring both an extremely high temperature rating and high magnetic strength. They are retained by fingers in the bell-end, and attached with a special high-temp glue made for the Japanese space program. The high-speed, shielded stainless bearings in the Z Series are made by NMB Japan; expensive for Hyperion to install, but well worth it for smoothness and longevity.

Specification
  • Stator Diam. mm: 22
  • Magnet Length mm: 5
  • Weight g: 29.4
  • Outside Diameter mm: 28
  • Length mm: 33
  • Output Shaft Diameter mm: 3
  • Mount Screw Diameter mm: 3
  • Max eff. Current A: 4-7
  • Peak current A: 9
  • LiPo cells: 2~3
  • NiMH & NC cell: 6~10
  • Winding: 38T
  • Resistance Ohm: 0.178
  • Io A: 0.56
  • KV rpm/V: 1370
  • Recommended ESC: 10A