Arduino Compatible RC522 RFID Module (Blue)

Old Price: $5.95

Special Price: $4.92

Part Number: HP-ASE-RC522

Ships from :

USA

IN STOCK

Available: 10+ Shipping Info*
Japan

IN STOCK

Available: 10+ Shipping Info*
China

BACKORDER

Available: 0 Shipping Info*

Get creative with your friends and families

RC522 IC Brief Introduction.

MF RC522 is a highly integrated read/write IC for contactless communication on 13.56MHz. card chip to read and write, of NXP for “three” and the application launched a low voltage, low cost, small size, non-contact card chip to read and write, intelligent instruments and portable handheld devices developed better.

The MF RC522 use of advanced modulation and demodulation concept completely integrated in the 13.56MHz all kinds of passive contactless communication methods and protocols. 14443A compatible transponder signal. The digital part handles the the ISO14443A frames and error detection. In addition, support Quick CRYPTO1 encryption algorithm, the term verification MIFARE series. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transfer rates up to 424kbit/s.

As 13.56MHz highly integrated card reader series chip new family, the MF RC522 MF RC500 MF RC530 there are many similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode, helps to reduce the connection, reduce PCB board volume and reduce costs.

RFID Module Brief Introduction

The MF522-AN module is the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader

Features:

  • Standard shield interface, perfectly compatible with Arduino UNO / MEGA2560
  • Very easy to use with the library for Arduino: RFIDMaster
  • Operating voltage: 4.5~5.2V
  • Interface logic level: Onboard level converter chip, compatible with 3.3V / 5V
  • Operating current: 13-~26mA
  • Idle current: 10~13mA
  • Sleep current: <80uA
  • Peak current: <50mA
  • Operating Frequency: 13.56MHz
  • Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
  • Data transfer rate: maximum 10Mbit/s
  • Application: Smart home project, Voice broadcast access control system, Attendance punch card system

Included with the package:

  • Arduino Compatible RC522 RFID Module (Blue) x 1
  • S50 special-shaped card (as shown by the key ring shape) x 1
  • Straight & Angled rows of pin set (needs soldering) x 1

Specifications:

  • Operating current :13-26mA/DC 3.3V
  • Idle current :10-13mA/DC 3.3V
  • Sleep current: <80uA
  • Peak current: <30mA
  • Operating Frequency: 13.56MHz
  • Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
  • Product physical characteristics: size: 40mm0mm
  • Environmental Operating temperature: -20°C to +80°C
  • Environmental Storage Temperature: -40°C to +85°C
  • Relative humidity: relative humidity 5%-95%

Module interfaces SPI Parameter:

  • Data transfer rate: maximum 10Mbit/s

*This product is not produced or endorsed by Arduino.