Super 5 in 1 PDB w/ BEC 5V & 12V output (3S~6S input)

Old Price: $10.95

Special Price: $7.04

Part Number: HP-FPHUBV2

Ships from :



Available: 0 Shipping Info*


Available: 0 Shipping Info*

Hyperion quality products!

The Hyperion 5 in 1 Mini Power Hub v2 has been engineered to provide the highest possible performance and reliability in a 36*36mm sized PCB.

This Hyperion Power Hub distributes power from a battery pack to 4 ESCs, as well as providing synchronized & regulated DC outputs for powering cameras, servos, Video Transmitters, LEDs, and etc.

Your input voltage may range from 3S to 6S LiPo. The Power Hub also features a convenient solder bridge of various voltage for camera & video TX outputs.


  • Heavy Duty 2oz copper & 4-layers PCB
  • ESC & Battery solder tabs
  • Power bridge for various Cameras & VTX
  • 5V & 12V Output LED indicators w/Short circuit tolerance
  • Designed for RC Receivers, Flight controllers, Vidro Transmitters, Cameras, OSD, and Servos.


  • Input voltage range: 9 - 26V DC (3S-6S LiPo)
  • Regulated 5V and 12V outputs
  • LED power indicators (5V & 12V outputs )
  • PCB Size: 36*36mm
  • PCB Mounting Hole Size: 30.5mm square spacing
  • Weight: 6g

ESC Output:

  • Continuous current: 20A per output
  • Peak current (10 seconds/minute): 25A per output

5V BEC Specifications:

  • Voltage output: 5.0 +/- 0.1VDC
  • Continuous current: 3A
  • Short-circuit tolerant (10 seconds/per minute)
  • Short-circuit tolerant (10 seconds/per minute)
  • LED Voltage Indicators

12V BEC Specifications:

  • Voltage output: 12.0 +/- 0.2VDC
  • Continuous current: 2 Amps (Max.3A 10s/per minute)
  • Short-circuit tolerant (10 seconds/per minute)
  • LED status indicators
  • ***To operate 12V BEC, you must input with a 4S~6S LiPo

Camera & VTX Bridge Operations

  • 3S Operation: Choose “VCC” for 12V camera & 12V VTX, VCC= Battery Voltage.
  • 4~6S Operation: Choose “12” for 12V camera & 12V VTX
  • 3~6S Operation: Choose “5” for 5V camera
  • Note: Video pass through is the “CAM” pad to the “VTX” pad.

Included in the package:

  • PCB Board


  • To operate the 12V BEC output, you must input 4S~6S LiPo battery for this to stabilize voltage.
  • Pay attention to the input polarity. Reversed polarity will damage this UBEC.