You have no items in your shopping cart.
Hyperion NEO-6M GPS Module for Pixhack w/Compass
Old Price: $19.50
Special Price: $9.75
Part Number: HP-FCGPS6M-P
Hyperion quality products!
The Hyperion NEO-6M GPS with compass module brings high performance from the u-blox6 position engine in the miniature NEO form factor. U-blox6 has been designed with low power consumption and low costs in mind. Intelligent power management is a breakthrough for low-power applications. These receivers combine a high level of integration capability with flexible connectivity options in a small package. This makes them perfectly suited for mass-market end products with strict size and cost requirements. The DDC interface provides connectivity and enables synergies with u-blox LEON and LISA wireless modules.
Compared with original 6M GPS, the mini version inherits the same high performance, it's more compact in size and specially suitable for smaller size drones. The default signal line is compatible with PixHack pin-out, but can easily converted to be compatible with any APM style Flight Controller.
Features:
- U-blox 6 position engine:
- Navigate down to -162 dBm and -148 dBm coldstart
- Faster acquisition with AssistNow Autonomous
- Configurable power management
- Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
- Anti-jamming technology - Simple integration with u-blox wireless modules
- A-GPS: AssistNow Online and AssistNow Offline services, OMA SUPL compliant
- Backward compatible (hardware and firmware)
- Easy migration from NEO-5 family or NEO-4S
- LCC package for reliable and cost effective manufacturing
- Compatible with u-blox GPS Solution for Android
- Based on GPS chips qualified according to AEC-Q100
- Manufactured in ISO/TS 16949 certified production sites
- Qualified according to ISO 16750
Included in the package:
- Hyperion NEO-6M GPS module x 1
- Folding base accessories set x 1
Pin Configurations:
| For APM / PIXHAWK | ||
| Colour | GPS | Flight Controller |
| Black | GND | GND |
| Red | +5V | +5V |
| Blue | SDA | SDA |
| Orange | SCL | SCL |
| Green | TX | RX |
| Yellow | RX | TX |
| For CC3D / SP Racing F3 | ||
| Colour | GPS | Flight Controller |
| Black | GND | GND |
| Red | +5V | +5V |
| Blue | RX | TX |
| Orange | TX | RX |
| For NAZE32 / FLIP32 | ||
| Colour | GPS | Flight Controller |
| Green | GND | GND |
| Red | +5V | +5V |
| Blue | RX | TX |
| Yellow | TX | RX |
Specifications:
- Receiver type:
- 50-channel U-blox 6 engine
- GPS L1 C/A code
-SBAS: WAAS, EGNOS, MSAS - Navigation update rate up to 5 Hz
- Accuracy
- Position 2.5 m CEP
- SBAS 2.0 m CEP - Acquisition
- Cold starts: 27 s
- Aided starts: 3s
- Hot starts: 1 s - Sensitivity
- Tracking: -162 dBm -161 dBm
- Cold starts: -148 dBm -147 dBm
- Hot starts: -157 dBm -156 dBm - Power supply 2.7 V - 3.6 V
- Power consumption 111 mW @ 3.0V (continuous)
- 33 mW @ 3.0V Power Save Mode (1 Hz)
- 68 mW @ 1.8V (continuous)
- 22 mW @ 1.8V Power Save Mode (1 Hz) - Operating temp. -40° C to 85° C
- Supported antennas Active and passive
- Interfaces
- 1 UART
- 1 USB V2.0 full speed 12 Mbit/s
- 1 DDC (I2C compliant)
- 1 SPI - Digital I/O
- Configurable timepulse
- 1 EXTINT input for Wakeup - Serial and I/O Voltages: 2.7 - 3.6 V
- Timepulse Configurable 0.25 Hz to 1 kHz
- Protocols NMEA, UBX binary, RTCM
Tip: After receiving the NEO6M GPS, because of the large changes in Location, please put in the open area for 1~2 hours. Use it only after downloading the Ephemeris and Stable Position Located.
Note: some Mini APM GPS port line is different from us , Please check carefully the pin diagram together with the description of flight controller before powering on.
Please wait...