Align 150GRS Flybarless System Set AL-HEG15004

$61.19

Part Number: AL-HEG15004

Ships from :

USA

OUT OF STOCK

Available: 0 Shipping Info*
Japan

OUT OF STOCK

Available: 0 Shipping Info*
China

OUT OF STOCK

Available: 0 Shipping Info*

Instruction:

  • • Use for T-REX 150/150X.
  • • 6-axis Gyro:3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
  • • Attitude Auto-level Mode:While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
  • • Rescue Mode:While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
  • • 3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
  • • Built-in Receiver:Futaba S-FHSS 2.4GHz System.
  • • Plug-in Receiver(Required):Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite

Accessories:

  • • 150 Main Control Board x 1
  • • 150 Receiver Board x 1
  • • 7A Brushless ESC x 1
  • • 150 GRS Double Sided Tape A x 1
  • • 150 GRS Double Sided Tape B x 1
  • • 150 Battery Socket x 1
  • • 150 Battery Socket Mount x 1

Specification:
150GRS Flybarless System:

  • • Operating voltage range: 2S Li-Po
  • • Operating current consumption: <100mA @ 5V
  • • Rotational detection rate: 2000°/sec
  • • Rudder yaw detection rate: 2000°/sec
  • • Sensor resolution:16BIT
  • • Operating temperature:-20℃ ~ 65℃
  • • Operating humidity:0% ~ 95%
  • • Swashplate Support : MODE H-1
  • • Receiver Support : ALIGN / Futaba S-FHSS、DSM2 / DSMX / DMSS
  • • Transmit Distance: In open space without interference <150M
150X Brushless ESC:
  • • Main motor output current: Continuous 6A / Surge 7A
  • • Tail motor output current: Continuous 3A / Surge 3.5A
  • • BEC output current: Continuous 5V/2A / Surge 5V/2A
  • • Persistent maximum current require optimal heat dissipation condition.
  • • Supported motor types: 2 poles to 18 poles brushless outrunners.
  • • Maximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM.
  • • Input voltage: 2S Li-Po.

Download latest firmware from Align home page. Click Here