You have no items in your shopping cart.
TOPMODEL CZ Q12
Old Price: $439.95
Special Price: $310.95
Part Number: TOP-Q12
The Q12 takes use from Topmodel's long-years experience with DLG models. The gliders, made with the foam/skin technology, flew much better, than those stick and film types. The main reason was seemingly the overall improvement of aerodynamic properties.
The foam/skin design provides much higher rigidity. The A/R can be very high. The ailerons and brakes will not warp. The A/R is about same as that of free flight power models.
Each half of the wing is made as single part. The dihedral is built in during the molding process.
Except for the wing, all other parts are similar to the Q11.
The pod was designed to be used for many different types of models and equipment. It is long such, that folding prop up to 14" diameter could be used. The pod is very slick, yet it provides enough room for RC and power unit parts. The bottom is a bit flattened to get even more room inside the pod.
The rear fuselage part consists of carbon/glass boom. It provides rather long tail arm for better flight stability.
The tail feathers are made in similar method as the wings. They are very lightweight.
The CG is in correct position even with the very lightweight power unit components.
The on-board RC system is normally supplied from the ESC's BEC. If the current demands of your system is higher, you can use external BEC regulater.
Needed to Complete
- Radio System
- Spinner: 32mm
- Folding Propeller
- Servos x6 (AH-EFLRS60)
- Compatible charger
- Motor: XM2826EA-10
- ESC: SPIN 33 PRO JETI or Castle Creation Talon 35
- Spinner: 32mm
- Prop: Aeronaut 10x6
- Battery: 2S 1200mAH 25C
- Servos: Tiny Servo Dymond D47
- Wingspan: 2000 mm
- Length: 1210 mm
- Weight: 0,53-0,65 kg
- Airfoil: AG 40, 41, 42, 43.
- Control: K+KL+V+S+M