ZTW Mantis 6 Amp ESC w/BEC


Part Number: ZTW-M06

Ships from :



Available: 0 Shipping Info*


Available: 5+ Shipping Info*


Available: 0 Shipping Info*


ZTW Mantis series ESC is a medium level product line designed for fixed wing and Helis. It features super smooth start up and throttle linearity, multiple protection, strong BEC output, low cost and best performance at this level of product. This ESC can be programmed by using your transmitter.


  • • Super smooth and accurate throttle linearity
  • • Safety thermal over-load protection
  • • Auto throttle shut down in signal lose situation
  • • Low Voltage Cut off
  • • Governor Mode
  • • Strong BEC Output

Compact body, excellent performance
Mantis 6A BEC weighs only 6g, reduce load greatly for drone, meanwhile keep powerful functions and easy to control.

Protect your beloved plane
Over temperature protection: Automatically reduce output power while the temperature reach more than 110℃, recover power while the temperature is under 100℃.
Electrify safety: The ESC itself won't startup motor even though radio sticker raised to higher position while power on, in order to avoid motor spin suddenly.


  • • Continuous current:6A
  • • Burst current: 8A
  • • Input voltage range: 5-10 NC / 2-3S LiPo
  • • BEC output: 5V/1A
  • • Dimension(L*W*H): 21*14*7
  • • Weight: 6g

Programming options

  • • Breake Type: Breake OFF*, Soft Breake, Mid Breake, Hard Breake
  • • Battery Type: NiCD/NiMH, LiPo*, LiFe
  • • Cut Off Voltage Threshold: 2.8V/50%, 3.0V/60%*, 3.2V/65%, No Protection
  • • Restore Factory Setup Defaults: Restore
  • • Motor Timing: Auto*, 2°, 8°, 15°, 22°, 30°
  • • BEC Voltage Output: 5.0V*, 5.5V, 6.0V
  • • Governor Mode: RPM OFF*, 1st Soft Start, 2nd Soft Start, Governor Mode 1, Governor Mode 2
  • • Motor Rotation: Forward*, Reverse
  • • Start Up Strength: 10%, 15%, 20%, 25%, 30%*, 35%, 40%, 45%, 50%
  • • Low Voltage Cut Off Type: Reduce Power*, Cut Off Power
* Default setting

Note: BEC Voltage Output setting for 6A and 12A ESC is 5.0V fixied.

Mantis programming card is not compatible with this 6A ESC. Do NOT program this ESC with the card.