ZTW SEAL 120A OPTO HV

$149.95

Part Number: ZTW-S120HV

Ships from :

USA

OUT OF STOCK

Available: 0 Shipping Info*
Japan

IN STOCK

Available: 2 Shipping Info*
China

OUT OF STOCK

Available: 0 Shipping Info*

Overview

SEAL series ESC is designed exclusively for RC Boat with great performance. Customer could choose varieties of model from low to high voltage.

Features

  • 1.Programmable two way mode.
  • 2.over-heat protection, low-voltage protection and lost-signal protection.
  • 3.Secondary sub-menu setting by LCD program card or PC interface.
  • 4.Firmware updating by PC interface.
  • 5.Unique metal shape designing gives your new fashion visual impact.
  • 6.Super smooth and accurate throttle linearity.
  • 7.Support and match with most of the motors, including high RPM motors.
  • 8.Programmable motor timing.
  • 9.Utilizes new smaller MOSFET technology to minimize weight.
  • 10.Auto motor shut down if signal is lost or there is interference.
  • 11.Insterted Anti-spark circuit on the PCB.

Reliable Material and Strong Structure
SEAL utilizes aluminum canopy, so its appearance is more attractive than other brand. Reduce damage possibility with high load obviously while output violent power. All the components are imported to ensure high quality and reliability.

Efficient Heat Sink
Customized heat sinks and copper heat protection, good heat conduction water cooling module, build a water pipe at each MOS tube of power amplifier board. Construct to a super reliable cooling system.

Industrial Level Waterproof Design
Waterproof design completely, protect the ESC well even at extreme environment.

Protect Your Beloved Boat
Over Temperature Protection:Automatically reduce output power while the temperature reach more than 110℃, recover power while the temperature is under 100℃.
Electrify Safety: The ESC itself won’t startup motor even though radio sticker raised to higher position while power on, in order to avoid motor spin suddenly.


Specifications

Product Item   SEAL120A OPTO HV
Model Number    6120400
Form Brushed / Brushless Brushless
  HV / Normal HV
Hardware Parameters Continuous Current (A) 120A
  Burst Current(A) 150A
  Battery Cell (NiXX/Lipo) 18-38 NC/6-12 Lipo
  BEC output /
Dimensions Length 62mm
  Width 65mm
  Height 23.5mm
  Weight 125g
Wire & Plug Power Wire 10#AWG,160mm-Red/160mm-Black
  Motor Wire 10#AWG,65mm-Black
  Signal Wire 1 (Brown/Red/Orange)60C,add a common JR male connector at the end of 330mm wire
  Signal Wire 2 (Brown/Red/Orange)30C,add a common JR male connector at the end of 150mm wire
  Power Plug (Yes/No) no
Parameter programming Transmitter  yes
  Jumper  programming card   
  LCD programming card yes
  WiFi programming card yes
  USB adapter yes
Firmware Upgrade Firmware online
(Yes/No)
yes

ZTW ESC PC Software
ZTW Seal Series ESC PC Software

ZTW Seal Series ESC Firmware
ZTW Seal 120A and 150A HV ESC firmware

ZTW LCD Program Card Firmware
ZTW Seal Series Program Card Firmware


The Tones Sequence and Code

  • 1. Beep- : Brake Type (1 short beep)
  • 2. Beep-Beep- : Battery Type (2 short beeps)
  • 3. Beep-Beep-Beep- : Cut off Voltage Threshold (3 short beeps)
  • 4. Beep-Beep-Beep-Beep- : Restore Factory Setup Defaults (4 short beeps)
  • 5. Beep----- : Motor Timing (1 long beep)
  • 6. Beep-----Beep- : Motor Rotation (1 long tone 1 short beep)
  • 7. Beep-----Beep- Beep- : Start up Strength (1 long tone 2short beeps)
  • 8. Beep-----Beep- Beep- Beep- : Low Voltage Cut off Type (1 long tone 3 short beeps)

Prog. Item
            
Tone of value


Prog.Item
BEEP- BEEP-
BEEP-
BEEP-
BEEP-BEEP-
BEEP-
BEEP-  BEEP-
BEEP-
BEEP— BEEP—
BEEP-
BEEP—
BEEP-
BEEP-
BEEP—
BEEP-
BEEP-
BEEP-
BEEP—
BEEP-
BEEP-
BEEP-
BEEP-
  1 short BEEP 2 short BEEP 3 short BEEP 4 short BEEP 1 long BEEP 1 long BEEP & 1 short BEEP 1 long BEEP & 2 short BEEPs 1 long BEEP & 3 short BEEPs 1 long BEEP & 4 short BEEPs
  Brake Type Brake OFF Soft Brake  Mid Brake  Hard Brake          
  Battery Type NiCd/NiMH LiPo LiFe            
  Cut Off Voltage Threshold 2.8V/50% 3.0V/60% 3.2V/65% No Protection          
  Restore Factory Setup Defaults Restore                
  Motor Timing Auto 15° 22° 30°      
  Motor Rotation Forward Reverse               
  Start Up Strength 10% 15% 20% 25% 30% 35% 40% 45% 50%
  Low Voltage Cut Off Type Reduce Power Cut Off  Power              
Default Brake Type:  Brake Off
Battery Type: LiPo with Automatic Cell detective
Cut Off Voltage Threshold:      3.0V/60%
Motor Timing:  Auto
Motor Rotation:  Forward
Start Up Strength:  30%
Low Voltage Cut Off Type:   Reduce Power

Dimensions

Parts & Accessories