You have no items in your shopping cart.
ZTW SEAL 160A SBEC 8A
$119.95
Part Number: ZTW-S160
Overview
SEAL series ESC is designed exclusively for RC Boat with great performance. Customer could choose varieties of model from low to high voltage.
Features
- 1.Programmable two way mode.
- 2.over-heat protection, low-voltage protection and lost-signal protection.
- 3.Secondary sub-menu setting by LCD program card or PC interface.
- 4.Firmware updating by PC interface.
- 5.Unique metal shape designing gives your new fashion visual impact.
- 6.Super smooth and accurate throttle linearity.
- 7.Support and match with most of the motors, including high RPM motors.
- 8.Programmable motor timing.
- 9.Utilizes new smaller MOSFET technology to minimize weight.
- 10.Auto motor shut down if signal is lost or there is interference.
- 11.Insterted Anti-spark circuit on the PCB.
Reliable Material and Strong Structure
SEAL utilizes aluminum canopy, so its appearance is more attractive than other brand. Reduce damage possibility with high load obviously while output violent power. All the components are imported to ensure high quality and reliability.
Efficient Heat Sink
Customized heat sinks and copper heat protection, good heat conduction water cooling module, build a water pipe at each MOS tube of power amplifier board. Construct to a super reliable cooling system.
Industrial Level Waterproof Design
Waterproof design completely, protect the ESC well even at extreme environment.
Strong BEC Output
Built-in maximum 5.5V SBEC, output 8A current. Perform well with higher performance servo.
Protect Your Beloved Boat
Over Temperature Protection:Automatically reduce output power while the temperature reach more than 110℃, recover power while the temperature is under 100℃.
Electrify Safety: The ESC itself won’t startup motor even though radio sticker raised to higher position while power on, in order to avoid motor spin suddenly.
Specifications
| Product Item | Seal 160A SBEC 8A | |
| Model Number | 6160200 | |
| Form | Brushed / Brushless | Brushless |
| HV / Normal | Normal | |
| Hardware Parameters | Continuous Current (A) | 160A |
| Burst Current(A) | 180A | |
| Battery Cell (NiXX/Lipo) | 5-18 NC/2-6 Lipo | |
| BEC output | 5.5V / 8A | |
| Dimensions | Length | 62mm |
| Width | 65mm | |
| Height | 23.5mm | |
| Weight | 130g | |
| Wire & Plug | Power Wire | 10＃AWG，160mm-Red/160mm-Black |
| Motor Wire | 10＃AWG，65mm-Black | |
| Signal Wire 1 | (Brown/Red/Orange)60C，add a common JR male connector at the end of 330mm wire | |
| Signal Wire 2 | ||
| Power Plug (Yes/No) | no | |
| Parameter programming | Transmitter | yes |
| Jumper programming card | ||
| LCD programming card | yes | |
| WiFi programming card | yes | |
| USB adapter | yes | |
| Firmware |
Upgrade Firmware online (Yes/No) |
yes |
ZTW ESC PC Software
ZTW Seal Series ESC PC Software
ZTW Seal Series ESC Firmware
ZTW Seal 130A and 160A ESC firmware
ZTW LCD Program Card Firmware
ZTW Seal Series Program Card Firmware
The Tones Sequence and Code
- 1. Beep- : Brake Type (1 short beep)
- 2. Beep-Beep- : Battery Type (2 short beeps)
- 3. Beep-Beep-Beep- : Cut off Voltage Threshold (3 short beeps)
- 4. Beep-Beep-Beep-Beep- : Restore Factory Setup Defaults (4 short beeps)
- 5. Beep----- : Motor Timing (1 long beep)
- 6. Beep-----Beep- : Motor Rotation (1 long tone 1 short beep)
- 7. Beep-----Beep- Beep- : Start up Strength (1 long tone 2short beeps)
- 8. Beep-----Beep- Beep- Beep- : Low Voltage Cut off Type (1 long tone 3 short beeps)
|
Tone of value Prog.Item |
BEEP- |
BEEP- BEEP- |
BEEP- BEEP-BEEP- |
BEEP- BEEP- BEEP- BEEP- |
BEEP— |
BEEP— BEEP- |
BEEP— BEEP- BEEP- |
BEEP— BEEP- BEEP- BEEP- |
BEEP— BEEP- BEEP- BEEP- BEEP- |
|
| 1 short BEEP | 2 short BEEP | 3 short BEEP | 4 short BEEP | 1 long BEEP | 1 long BEEP & 1 short BEEP | 1 long BEEP & 2 short BEEPs | 1 long BEEP & 3 short BEEPs | 1 long BEEP & 4 short BEEPs | |||
| Brake Type | Brake OFF | Soft Brake | Mid Brake | Hard Brake | |||||||
| Battery Type | NiCd/NiMH | LiPo | LiFe | ||||||||
| Cut Off Voltage Threshold | 2.8V/50% | 3.0V/60% | 3.2V/65% | No Protection | |||||||
| Restore Factory Setup Defaults | Restore | ||||||||||
| Motor Timing | Auto | 2° | 8° | 15° | 22° | 30° | |||||
| Motor Rotation | Forward | Reverse | |||||||||
| Start Up Strength | 10% | 15% | 20% | 25% | 30% | 35% | 40% | 45% | 50% | ||
| Low Voltage Cut Off Type | Reduce Power | Cut Off Power |
| Default |
Brake Type: Brake Off Battery Type: LiPo with Automatic Cell detective Cut Off Voltage Threshold: 3.0V/60% Motor Timing: Auto Motor Rotation: Forward Start Up Strength: 30% Low Voltage Cut Off Type: Reduce Power |
|
Dimensions
Please wait...