You have no items in your shopping cart.
Micro Tamiya cable assembly, Female connector
Old Price: $1.20
Special Price: $0.96
Part Number: HP-LGTAM-M-FCBL
"Hyperion keeps you connected!
This is the Micro Tamiya Female connector with 18AWG wires pre crimped, commonly used with 7.2V NiCd/NiMh battery packs that power many RC cars.
Tamiya connector is a type of DC connector, commonly used on radio-controlled model vehicle battery packs and chargers. The connector comes with a locking mechanism which are unlikely to come out loose when in use and are therefore reliable for Rc applications. The connector physically isolates the positive and negative wires, this makes them safe for use in relatively low-current applications (up to about 15A) in dirty conditions (for example, model boats or RC cars used outdoors). The connectors physical shape also makes it foolproof in reverse polarity connections avoiding damage to important electronics.
Included with the package:
- Micro Tamiya Female connector cable assembly x 1
- Type: Female (Mini)
- Dimensions: 10x6x22mm (3/8"" x 7/32"" x 7/8"")
- Wire Length: 6""
Note: In some cases, Mini-Tamiya connectors are wired in reverse polarity. This is often the case with airsoft guns, where the square profile terminal is the negative terminal and the rounded terminal is the positive terminal.
General Information: The usual wiring has the positive (red) wire running to the terminal with a square profile, and the negative (black) wire running to the half-circle, half-square terminal. This is true for both genders of connector. The female sockets are in a male housing and the male pins are in a female housing. The male pins (female housing) connector is usually on the battery side. In electrical and electronics engineering, the convention is that gender refers to the metal contact parts of a connector in order to avoid ambiguity. A large number of hobbyist retailers selling these connectors refer to the gender of the plastic housing, which is against convention and can lead to errors.