Ultimate PDB Power Hub w/ STOSD8, 140A Current Sensor & 5V/12V selectable BEC

$23.95

Part Number: HP-FPHUBOSD8-H

Hong Kong

IN STOCK

Ships from :

USA

OUT OF STOCK

Japan

IN STOCK


Hyperion quality products!

The Hyperion Ultimate PDB Power Hub with STOSD8 has been designed as an all in one power source . It can power all the devices on your platform from a single input. It acts as a multifunctional HUB and made from 4 layered PCB. Specially made for the mini FPV Quads. Small size no extra wiring needed. The 12V BEC is linear regulated, no LC Filter needed. Built-in STOSD8 support. Totally Plug & Play, no complicated settings needed.

Features:

  • 3-5s lipo support
  • Built-in STOSD8 tool
  • Plug & play
  • Compact and light, perfect for Mini and micro fpv quads

PDB (ESC outputs):

  • Continuous current: 30A per output
  • Peak current (10 seconds/minute): 35A per output

BEC 5V outputs:

  • Designed for RC Receivers, Flight controllers, OSD, and Servos
  • DC/DC synchronous buck regulator
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps (Max.2.5A 10s/minute)
  • Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
  • Short-circuit tolerant (5 seconds/minute)

BEC 12V outputs:

  • Linear regulator, very low noise
  • Designed for Video TX or FPV camera
  • Voltage: 12.0 +/- 0.3VDC (4~5S operation)
  • Continuous current: 500mA@16V IN, 400mA@20V IN
  • Short-circuit tolerant (2 seconds/minute)
  • If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

Current Sensor 140A:

  • If current >140A. STOSD display 140A

LED indicator function:

  • Blue LED blinks: STOSD is initializing
  • Blue LED constant: STOSD is working

Included with the package:

  • HUBOSD x 1

Specifications:

  • Input voltage range (3S-5S lipo): 8 - 21VDC
  • PDB: 4x30A (Max.4x35A)
  • Regulated 5V and 12V outputs
  • Current Sensor 140A
  • Built-in STOSD8
  • 2oz copper, 4-layered 1.6mm PCB
  • 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs
  • Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
  • 1x Serial port (RX, TX, G)
  • Dimensions: 46x36x4mm
  • Weight: 8.5g
  • Mounting holes 30.5mm square spacing,?3mm